0

Braided Hoses

Is the old rubber hose at the fuel pump sweating, or does the oil cooler need new lines? Braided hoses consist of an inner hose with an outer braid of stainless steel or nylon. They are typically used for fuel, oil and coolant in your project.

What does the braid do?

The braid protects the inner hose against abrasion, heat and sharp edges in the engine bay. It can also limit the hose from expanding under pressure. The core is typically rubber, e.g. in a nylon-braided rubber hose in -6AN. Hoses with a PTFE core can be found under PTFE hoses.

How to choose braided hoses

  • Size: The AN size indicates the dimension. In this category you will find, for example, 3AN from Nitrous Express and -4, -6 and -10 AN from Vibrant. Choose based on flow requirements and the fittings on your pump, filter or cooler.
  • Fluid type: Check that the core is designed for the fluid the hose will carry. Fuel containing ethanol can have different requirements than engine oil.
  • Braid: Stainless steel typically provides robust protection but can wear on surrounding parts. Nylon is lighter and is gentler on paint and wiring.
  • Pressure and temperature: Check the manufacturer's limits for the specific part number.
  • Length: The hose is available both on a roll for custom fitting and in ready-made lengths with pre-fitted -10AN fittings.

Installation and maintenance

The hose must be assembled with hose ends that match both the AN size and the hose type. In this category you will also find hoses from brands such as Russell, Fragola and DeatschWerks. Wrap tape around the cut point before cutting so the braid does not fray. Avoid sharp bends and contact with hot parts, and regularly check for moisture at the connections. For the brake system, separate brake hoses are available.

Frequently asked questions

What is the difference between steel-braided and nylon-braided hose?

Both have an inner hose with an outer braid. Stainless steel typically offers good protection against abrasion and sharp edges. Nylon is lighter and is gentler on surrounding parts. Pressure and temperature limits depend on the specific hose.

Can I reuse my old fittings on a new braided hose?

That depends on whether the fitting is made for that exact hose type and AN size. Hoses with a rubber core and a PTFE core often require different hose ends. So check the manufacturer's instructions, and replace fittings with damaged threads or seals.

Are braided hoses allowed at vehicle inspection?

That depends on the product, the car and where the hose is fitted. For brakes, documented approval such as E-mark is typically required, and it must be checked for the specific part number. Fuel hoses must be designed for fuel and installed securely.

View as Grid List
Sort by
Display per page

NYLON BRAIDED FLEX

vib11975
Vibrant -20 AN Black Nylon Braided Flex Hose (10 foot roll)
298,66 € excl. VAT

NYLON BRAIDED FLEX

vib11988
Vibrant -8 AN Black Nylon Braided Flex Hose (5 foot roll)
49,34 € excl. VAT

NYLON BRAIDED FLEX

vib11968R
Vibrant -8 AN Two-Tone Black/Red Nylon Braided Flex Hose (10 foot roll)
96,34 € excl. VAT

NYLON BRAIDED FLEX

vib11964R
Vibrant -4 AN Two-Tone Black/Red Nylon Braided Flex Hose (10 foot roll)
77,95 € excl. VAT

NYLON BRAIDED FLEX

vib11970
Vibrant -10 AN Black Nylon Braided Flex Hose (10 foot roll)
102,79 € excl. VAT

NYLON BRAIDED FLEX

vib11986R
Vibrant -6 AN Two-Tone Black/Red Nylon Braided Flex Hose (5 foot roll)
46,88 € excl. VAT