Camshaft Seals
Is oil seeping out behind the camshaft pulley, or does the camshaft need to come out during a top-end rebuild? Here you will find oil seals, gaskets and complete gasket kits for the camshaft. This category is for you if you want to make your engine oil-tight again, or if you want to build a project with new seals from the start.
What does a camshaft seal do?
The camshaft seal seals the point where the camshaft passes out through the cylinder head, typically behind the camshaft pulley. With age and heat, the rubber can harden, and oil can then seep out. On engines with a timing belt, the oil can reach the belt and shorten its service life. That is why the seals are often replaced together with the timing belt, since you have access anyway. Seals for the other end of the engine can be found under crankshaft seals. Other oil seals are listed under oil seals.
How to choose the right kit
It is the engine, not just the car model, that determines fitment. So check the model year and engine code against the part number. The Fel-Pro kits, for example, are listed for specific model years of the Subaru WRX, Honda Accord and Mazda Miata. The Cometic kit is listed by Honda engine codes such as B16A2 and H22A1.
- Scope: a kit can contain several seals for the same engine. See the contents for each product.
- Material: how well the seal withstands heat and oil depends on the rubber compound and the product.
- Project scope: if the cylinder head is coming off, it pays to replace all the seals at once.
Install the seal straight and without scratching the sealing lip. Also check the shaft for grooves where the old lip has been running. A worn shaft can make even a new seal leak. In this category you will find brands including Fel-Pro, Cometic Gasket and TwinPower.
Frequently asked questions
How can I tell if the camshaft seal is leaking?
Typical signs are oil on the front of the engine around the camshaft pulley, or oil residue on the timing belt and under the cover. The oil can also come from other seals. So clean the area and find the highest point where it is wet.
Should I replace the camshaft seal when I change the timing belt?
It is not a requirement, but it is often sensible because the camshaft pulley is removed anyway. If an old seal starts leaking shortly afterwards, the oil can damage the new belt.
What is the difference between a gasket kit and a single seal?
A kit typically combines several seals for the same engine, while a single seal covers one position. Exactly what is included depends on the product. So check the contents for the specific part number.