Bump Stops & Strut Boots
Does your suspension bottom out on bumpy roads, or has the rubber boot around your shock absorber cracked? This category brings together bump stops that limit suspension travel and boots that protect the piston rod from dirt and water. The parts are available for lowered, lifted and stock cars.
What bump stops and boots do
Bump stops typically sit on or near the shock absorber and take the final impact before the suspension bottoms out, so metal does not hit metal. The shock absorber boot covers the piston rod and can prevent dirt, water and road salt from wearing the seals and causing leaks. The two parts are often fitted together, and KYB, for example, offers boots for both the front and rear axle. Both parts work closely with your shock absorbers and springs.
How to choose bump stops
The right length and stiffness depend on your car's suspension travel and how it has been modified. Consider in particular:
- Lowered car: shorter bump stops can make room for the remaining travel, so the car is not riding on the bump stops all the time.
- Lifted car: extenders, known as bump stop drops, can move the contact point to suit the new ride height after a lift kit.
- Material: rubber, polyurethane and foam can behave differently when compressed. This depends on the specific product.
- Use: daily driving, track days and off-road place different demands on how softly the bump stop should engage.
Installation and maintenance
Bump stops and boots must match the piston rod diameter and the shock absorber's design. So check the part number against your shock absorber or your coilover kit. Inspect the boot for cracks whenever you have the wheels off anyway, as a torn boot no longer protects the rod. If you are replacing your shock absorbers, it makes sense to replace the bump stop and boot at the same time. In addition to KYB, we also stock parts from brands such as Energy Suspension, Prothane, Superpro and King Shocks.
Frequently asked questions
When should bump stops be replaced?
Typically when the rubber is cracked, crumbling or compressed flat, or if you hear hard knocks over bumps. After lowering or lifting, you should also check whether the existing bump stops still suit the new travel.
Can I lower my car without changing the bump stops?
It depends on how much the car is lowered and on the shock absorbers. With a larger drop, the original bump stops may be in contact almost constantly. This can make the car harsh and put strain on the shock absorber. Shorter bump stops can make room for the remaining travel.
What happens if the shock absorber boot is missing or cracked?
Dirt and water can reach the piston rod and wear the shock absorber's seals, so over time the shock absorber may start leaking oil. Replace a cracked boot before the damage reaches the shock absorber itself.