0

Exhaust Clamps

How do you keep your exhaust joints tight while still being able to take them apart at the next rebuild? In this category we collect clamps for pipes and flanges, such as V-band clamps, U-bolt clamps and butt joint clamps in stainless steel, as well as exhaust manifold bolts. The parts are for you if you are building new, repairing or upgrading your exhaust.

Clamp types and what they do

The clamps join the parts of the exhaust, and the type determines how the joint can be fitted and taken apart. V-band clamps tighten two flanges together with a single bolt and can typically be opened and closed again without cutting or welding. That is why they are often used on turbos and blow-off valves, and one example in the category is the Turbosmart BOV V-Band Clamp Assembly. You will find all variants under V-band clamps. U-bolt clamps press down on a pipe that has been slid over another. Butt joint clamps join two pipes of the same diameter end to end without overlap.

How to choose the right clamp

  • Size: A V-band clamp is chosen by the outer diameter of the flange, not the pipe. If the clamp is made for a specific flange, you should compare the part numbers.
  • Joint type: Overlapping pipes typically require a U-bolt clamp, while pipes meeting end to end suit a butt joint clamp.
  • Material: Stainless steel, such as 304 as in the Diamond Eye clamp, can withstand heat and moisture better than ordinary steel. Durability does, however, depend on the specific product.
  • Disassembly: If the joint needs to be opened often, a V-band clamp with a quick-release latch can be practical.

You will find pipes and flanges that fit the clamps under pipes, flanges and turndowns.

Installation and maintenance

Clean the flanges and pipe ends before assembly, and tighten according to the manufacturer's instructions. If you overtighten, thin-walled pipes can deform, and if the clamp is too loose, the joint can leak or rattle. Check the joints after the first few drives, once the exhaust has been hot, and again at service. Close to the exhaust manifold and headers temperatures can get high, so consider heat protection for the surrounding components. Brands in the category include Diamond Eye Performance, Ticon, Stainless Works and TiALSport.

Frequently asked questions

How do I measure for a V-band clamp?

Measure the outer diameter of the flanges while they are joined, and compare with the clamp's stated size. If the clamp is made for a specific flange or a specific turbo housing, check that the part numbers match.

Can I reuse a V-band clamp?

You typically can, if the clamp is not deformed and the bolt and nut are intact. Also check the flanges for damage. If the joint leaks after installation, the cause can be incorrect fit or dirt between the flanges.

When should I choose a butt joint clamp over a U-bolt clamp?

A butt joint clamp joins two pipes of the same diameter end to end, so neither pipe has to be expanded. A U-bolt clamp is typically used where the pipes overlap. The choice depends on the pipe ends and how often the joint needs to be taken apart.

View as Grid List
Sort by
Display per page

HX40 STYLE BAND CLAMP

depVC400HX40
Diamond Eye CLAMP V 4in FITS HX40 PIPE
62,69 € excl. VAT

Mishimoto MMCLAMP-VA-3

misMMCLAMP-VA-3
Mishimoto Aluminum V-Band Clamp - 3in
62,16 € excl. VAT

S.S. V-BAND CLAMP

vib19866C
Vibrant SS Quick Release V-Band Clamp w/Part 19847 19865 and 19866
57,31 € excl. VAT

S.S. V-BAND CLAMP

vib19861C
Vibrant Garrett GTX2860R / 2867R SS Quick Release V-Band Clamp
50,86 € excl. VAT

TiAL Sport 60mm Clamp Inlet

tls001056
TiAL Sport 60mm Clamp Inlet
68,82 € excl. VAT