0

Fuel Pump Strainers

What protects the fuel pump from dirt and particles from the tank? A pre-filter, also known as a strainer or filter sock, sits directly on the pump inlet. This category is for you if you are replacing a clogged filter or fitting a new in-tank pump in your project.

What does a fuel pump strainer do?

The strainer sits on the suction side of an in-tank pump. It catches rust, dirt and larger particles before they reach the pump. This reduces wear on the pump, but it does not replace the regular fuel filter after the pump. If the strainer becomes clogged, flow can drop and the pump has to work harder. Under high load, this can cause a lean mixture. If you upgrade to a more powerful model from our fuel pumps, you should typically also review the strainer.

How to choose the right strainer

The category includes, for example, filter socks from Walbro, both model-specific and universal, as well as in-tank filters from TI Automotive. Pay particular attention to these points:

  • Inlet and attachment: the strainer must fit your specific pump inlet and stay firmly in place without slipping off.
  • Shape and length: the strainer must be able to sit in the tank or in a fuel pump module without being pinched or bent.
  • Flow: the strainer must be able to deliver enough fuel for the pump's capacity. This depends on the individual product.

A universal strainer may require modification, so check the dimensions and description for the specific part number.

Installation and maintenance

It makes sense to replace the strainer when the pump is replaced, or if the tank has been dirty. Clean the tank so new dirt does not immediately clog the strainer. If you install the pump with a mounting kit, make sure the strainer is not pressed against the bottom of the tank. More fuel system parts can be found under fuel pumps and regulators.

Frequently asked questions

When should the strainer be replaced?

Typically when the fuel pump is replaced, or if there has been rust or dirt in the tank. A strainer that is discoloured, clogged or damaged should also be replaced, as it can restrict flow to the pump.

What symptoms can a clogged strainer cause?

It can cause stuttering, loss of power or cutting out under high load, because the pump cannot draw enough fuel. A pump that is noisier than normal can also be a sign. However, the symptoms can have other causes, so check the entire system.

Can I use a universal strainer instead of a model-specific one?

It is often possible if the inlet dimensions match the pump and the strainer can sit freely in the tank. A universal strainer may require modification, so compare the dimensions and description with your pump before buying.

View as Grid List
Sort by
Display per page