Exhaust Manifolds
Does your engine tick when it is cold, or is there a smell of exhaust fumes in the engine bay? This can be caused by a cracked exhaust manifold or a leaking gasket at the flange. In this category you will find exhaust manifolds and manifold flanges for both repairing original systems and projects where you build or modify the exhaust yourself.
Exhaust manifold or flange – what do you need?
The exhaust manifold collects the gas from the engine's cylinders and routes it on to the rest of the exhaust system. Among our exhaust manifolds you will find, for example, cast manifolds from BD Diesel as well as versions with an integrated catalytic converter. Several models are available separately for the driver side and passenger side, so on a V engine you can replace just the damaged side. Manifold flanges are used when you weld your own manifold or headers, or when a joint needs repairing – e.g. Kooks' flange for GM Gen5 LT-1. The category also includes parts from OMIX.
How to choose the right manifold
Fitment comes first, so check car model, year and engine against the part number. In this category you will find, for example, manifolds for the Ford F-150 3.5L Ecoboost, Ram 1500 with the 5.7L Hemi and Chevrolet/GMC 2500HD/3500HD with the 6.6L Duramax. Also look at:
- Side and engine: Check whether the part is for the driver side or passenger side, and that it fits your engine.
- Construction: A cast manifold is typically a direct replacement for the original, while headers – manifolds with separate tubes for each cylinder – can change the flow but often require more space and modification.
- Catalytic converter: If the original has a built-in catalytic converter, the replacement typically needs one too in order to maintain the car's emission level.
- Connection: Flange type, bolt pattern and pipe diameter – e.g. 1 7/8 inch on the Kooks flange – must match the rest of the system.
Installation and approval
Manifold bolts can be seized after many heat cycles, so use penetrating oil and plan for new gaskets and possibly new bolts. Tighten evenly and according to the manufacturer's instructions to avoid leaks. Whether the part is road legal depends on the product and the car, and approval must be checked for the specific part number – especially if the manifold contains a catalytic converter.
Frequently asked questions
How can I tell if my exhaust manifold is cracked?
Typical signs are a ticking noise, often most noticeable on a cold start, a smell of exhaust fumes in the engine bay or soot around the joint. The noise can also be caused by a leaking gasket, so inspect both the manifold and the flange.
When do I need a manifold flange?
A manifold flange is relevant when you build or repair a manifold or headers yourself. The flange must match the cylinder head's port shape and bolt pattern as well as the pipe diameter, and it typically requires welding.
Can a new exhaust manifold pass the vehicle inspection?
It depends on the product and the car. A direct replacement typically corresponds to the original, but if the catalytic converter or the exhaust layout is changed, you should check the approval for the specific part number before the inspection.