0

PCV Valves

Is your engine using more oil than expected, or are the gaskets sweating? A PCV valve controls how gases from the crankcase are routed back to the intake. We have valves, swivel fittings and seals for you, whether you need to replace a worn OEM part or build a ventilation system with AN fittings.

What does a PCV valve do?

During combustion, a small amount of gas slips past the piston rings and down into the crankcase. The PCV valve is a one-way valve that lets the vacuum in the intake draw the gases out for combustion. On a turbocharged or supercharged engine, it typically closes when there is boost pressure in the manifold. If the valve sticks in the open position, it can cause increased oil consumption and a rough idle. If it sticks in the closed position, crankcase pressure can rise and force oil out at the gaskets. Many combine the valve with an oil catch can or an air-oil separator so less oil vapour ends up in the intake.

How to choose a PCV valve

The most important thing is that the threads and connections match both the engine and the hoses:

  • Engine side: e.g. 10AN ORB or 3/8 BSPT, depending on where the valve is located.
  • Hose side: 10 mm or 0.375 inch hose barb, 6AN or 10AN male fitting, or 3/8 inch SAE.
  • Space: a swivel banjo version can make it easier to route the hose without sharp kinks.

Radium Engineering, for example, offers a replacement valve for the 2015+ WRX and 2013+ BRZ/FR-S with 3/8 BSPT to 10AN male. Other brands in the category include Gates, OMIX and Edelbrock.

Installation and maintenance

Use new seals when replacing the valve. Fel-Pro, for example, has a seal for the valve on the 06-15 Mazda MX-5 Miata and 15-21 Ford Mustang. Check the hoses for cracks and oil build-up when working in the engine bay, and also see the rest of our overflow tanks and catch cans.

Frequently asked questions

How can I tell if the PCV valve is faulty?

Typical signs are increased oil consumption, a rough idle, a whistling noise or oil leaking at the gaskets. Many valves can be tested by shaking them. A rattle suggests the valve is not stuck, but it depends on the type.

Can a PCV valve with AN fittings be used with an oil catch can?

Yes, that is typically the purpose of AN connections. The valve sits at the engine, and the hose is routed via the catch can on to the intake. Check that fittings and hose sizes match throughout the system.

Can modifying the crankcase ventilation cause problems at inspection?

It depends on the product and the car. The crankcase ventilation is part of the car's emissions system, so check for the specific part number whether the modification is permitted before fitting it to a registered car.

View as Grid List
Sort by
Display per page

Crankcase Vent Valve

gatEMH924
Gates 2007 Hyundai Santa Fe V-6 3.3L PCV Valve Crankcase Vent Valves
34,85 € excl. VAT

Crankcase Vent Valve

gatEMH978
Gates 2015 Chevrolet Corvette V-8 6.2L PCV Valve Crankcase Vent Valves
84,85 € excl. VAT

Crankcase Vent Valve

gatEMH961
Gates 05-10 Ford Mustang V-6 4.0L PCV Valve Crankcase Vent Valves
97,64 € excl. VAT

Crankcase Vent Valve

gatEMH970
Gates 17-21 Honda CR-V 4-Cyl. 1.5L PCV Valve Crankcase Vent Valves
48,55 € excl. VAT

Crankcase Vent Valve

gatEMH964
Gates 08-12 Nissan Versa 4-Cyl. 1.8L PCV Valve Crankcase Vent Valves
30,76 € excl. VAT

Crankcase Vent Valve

gatEMH899
Gates 2008 Subaru Legacy 4-Cyl. 2.5L PCV Valve Crankcase Vent Valves
34,70 € excl. VAT