Spoke Kits
Are your spokes bent, rusty or loose, or are you building a wheel from scratch? This category brings together complete sets of spokes and nipples for front and rear wheels, so the whole wheel can be tensioned with matching parts – for you who maintain your own spoked wheels.
What does a spoke kit contain?
A spoke kit consists of spokes and matching nipples – the small nuts in the rim used to tension the spokes. The kits from Excel are split into front and rear wheel, because front and rear spokes typically have different lengths and angles, and several of them come with a spoke wrench. The nipples are available in silver, black or blue, so you can choose a discreet or a more eye-catching look.
How to choose the right spoke kit
Three things must match your wheel:
- Front or rear: choose the kit for the position the wheel is fitted in.
- Thickness (gauge): the lower the number, the thicker the spoke. There are 8, 9 and 10 gauge options, and the thickness must match the holes in the hub and rim.
- Quantity: the kits contain 32 or 36 spokes, and the number must match the holes in the hub and rim.
Also check the spoke length for the specific part number, as it depends on the hub, rim and wheel size.
Fitting and maintenance
The spokes must be tightened gradually and evenly all the way round, so the rim stays round and centred. Uneven tension can cause wheel run-out and loose or broken spokes. Typically re-tighten after the first few rides, and check regularly for loose spokes. If you are changing tyres at the same time, you will find tyre valves and other tyre and wheel accessories in the related categories. Besides Excel, you will also find brands such as Renthal and EBC in the category.
Frequently asked questions
What does gauge mean on spokes?
Gauge indicates the thickness of the spoke. The lower the number, the thicker the spoke, so 8 gauge is stronger than 10 gauge. Choose the thickness your hub and rim are designed for, as the holes must match.
Can I just replace individual spokes?
With a single bent or broken spoke, it can be done. If several spokes are rusty, or you are rebuilding the wheel, a complete set typically gives more even tension and a uniform look.
How do I know if the spokes are tensioned correctly?
A light tap on each spoke with a tool should give roughly the same tone all the way round, and the wheel should spin without visible run-out sideways or up and down. If in doubt, have a professional true the wheel.