0

Supercharger Components

Want to adjust the boost on a supercharger system without replacing the supercharger itself? This category brings together supercharger pulleys and crank pulleys from Edelbrock for you who want to fine-tune or maintain the belt drive to the supercharger in your project.

What the pulleys do

The supercharger is driven by a belt from the crankshaft. The ratio between the diameter of the crank pulley and the supercharger pulley determines how fast the supercharger spins. A smaller pulley on the supercharger or a larger one on the crank typically increases the speed and thereby the boost. At Edelbrock the range includes, for example, E-Force Competition and Enforcer pulleys in several diameters as well as crank pulleys for LS with Corvette or truck offset. The superchargers themselves can be found under superchargers, and the whole area under superchargers and turbochargers.

How to choose a pulley

  • Boost and calibration: more boost typically requires adapted engine management, fuel and ignition timing.
  • Intake air temperature: higher supercharger speeds can result in hotter air and an increased risk of knock, depending on cooling and fuel.
  • Number of ribs: 6-, 8- or 10-rib must match the belt and the rest of the belt drive.
  • Offset: the crank pulley must line up with the supercharger pulley and the tensioner.
  • Belt grip: a smaller pulley gives less belt wrap, which can increase the risk of belt slip.

Installation and maintenance

Check the belt tension and wear after the first drives and during regular inspections. If the belt squeals or the boost drops at high rpm, it may be due to belt slip. Whether changed boost requires registration or inspection depends on the car and the modification, so look into it before driving the car on the road.

Frequently asked questions

How much boost does a smaller pulley on the supercharger give?

It depends on the supercharger type, the engine and the ratio to the crank pulley. The same pulley can give a different change on two cars, so follow the manufacturer's instructions and have the engine management adapted and checked afterwards.

Can I use a 10-rib pulley with my current belt?

Only if the belt drive is already 10-rib. The number of ribs on pulleys, belt and tensioner must match, otherwise the belt can run misaligned, wear quickly or slip.

Should I change the crank pulley or the supercharger pulley?

Both change the drive ratio. A larger crank pulley can give better belt grip than a very small supercharger pulley, but requires space and correct offset. The choice depends on the system, the engine bay and the desired boost.

View as Grid List
Sort by
Display per page

Edelbrock pulleys 6-rib design

ede15821
Edelbrock Pulley Supercharger E-Force Competition 3 25In
93,28 € excl. VAT

Edelbrock pulleys 6-rib design

ede15825
Edelbrock Pulley Supercharger E-Force Competition 3 75In
84,55 € excl. VAT

Edelbrock pulleys 6-rib design

ede15826
Edelbrock Pulley Supercharger E-Force Competition 4 125In
105,21 € excl. VAT

Edelbrock pulleys 6-rib design

ede15823
Edelbrock Pulley Supercharger E-Force Competition 2 75In
72,50 € excl. VAT

Edelbrock pulleys 6-rib design

ede15824
Edelbrock Pulley Supercharger E-Force Competition 3 875In
95,35 € excl. VAT

Edelbrock pulleys 8-rib design

ede15872
Edelbrock Pulley SC E-Fo\Rce 3 00In 8 Rib Black
78,92 € excl. VAT